Yamamoto group
Keio University, Mita, Japan
- Tracked papers
- 21 (2006–2022)
Topics
The most frequent field-map topics among the PI' tracked papers.
- Feedback 12
- Linear systems 7
- State preparation 5
- Photonics 4
- Sensing 4
- Gates 2
- Speed limits 2
- System identification 2
Recent papers
-
Generating quantum entanglement between macroscopic objects with continuous measurement and feedback control
Abstract
This study is aimed at investigating the feasibility of generating quantum entanglement between macroscopic mechanical mirrors in optomechanical systems while under continuous measurement and feedback control. We carefully derive a covariance matrix for mechanical mirrors in a steady state, employing the Kalman filtering problem with an assumed dominant cavity photon dissipation, such that the common and differential modes of the mirrors are squeezed by the action of measuring the output light beams. We demonstrate that entanglement between the mechanical mirrors is generated when the states of the common and differential modes are squeezed with high purity in an asymmetric manner. Our results also show that quantum entanglement between $7$ mg mirrors is achievable in the short term.
-
Numerical analysis of quantum circuits for state preparation and unitary operator synthesis
Abstract
We perform optimal-control-theory calculations to determine the minimum number of two-qubit CNOT gates needed to perform quantum state preparation and unitary operator synthesis for few-qubit systems. By considering all possible gate configurations, we determine the maximum achievable fidelity as a function of quantum circuit size. This information allows us to identify the minimum circuit size needed for a specific target operation and enumerate the different gate configurations that allow a perfect implementation of the operation. We find that there are a large number of configurations that all produce the desired result, even at the minimum number of gates. We also show that the number of entangling gates can be reduced if we use multi-qubit entangling gates instead of two-qubit CNOT gates, as one might expect based on parameter counting calculations. In addition to treating the general case of arbitrary target states or unitary operators, we apply the numerical approach to the special case of synthesizing the multi-qubit Toffoli gate. This approach can be used to investigate any other specific few-qubit task and provides insight into the tightness of different bounds in the literature.
-
Speed limits for two-qubit gates with weakly anharmonic qubits
Abstract
We consider the implementation of two-qubit gates when the physical systems used to realize the qubits possess additional quantum states in the accessible energy range. We use optimal control theory to determine the maximum achievable gate speed for two-qubit gates in the qubit subspace of the many-level Hilbert space, and we analyze the effect of the additional quantum states on the gate speed. We identify two competing mechanisms. On one hand, higher energy levels are generally more strongly coupled to each other. Under suitable conditions, this stronger coupling can be utilized to make two-qubit gates significantly faster than the reference value based on simple qubits. On the other hand, a weak anharmonicity constrains the speed at which the system can be adequately controlled: according to the intuitive picture, faster operations require stronger control fields, which are more likely to excite higher levels in a weakly anharmonic system, which in turn leads to faster decoherence and uncontrolled leakage outside the qubit space. In order to account for this constraint, we modify the pulse optimization algorithm to avoid pulses that lead to appreciable population of the higher levels. In this case we find that the presence of the higher levels can lead to a significant reduction in the maximum achievable gate speed. We also compare the optimal-control gate speeds with those obtained using the cross-resonance/selective-darkening gate protocol. We find that the latter, with some parameter optimization, can be used to achieve a relatively fast implementation of the CNOT gate. These results can help the search for optimized gate implementations in realistic quantum computing architectures, such as those based on superconducting circuits. They also provide guidelines for desirable conditions on anharmonicity that allow optimal utilization of the higher levels to achieve fast quantum gates.
-
Verification of conditional mechanical squeezing for a mg-scale pendulum near quantum regimes
Abstract
In quantum mechanics, measurement can be used to prepare a quantum state. This principle is applicable even for macroscopic objects, which may enable us to see classical-quantum transition. Here, we demonstrate conditional mechanical squeezing of a mg-scale suspended mirror (i.e. the center-of-mass mode of a pendulum) near quantum regimes, through continuous linear position measurement and quantum state prediction. The experiment involved the pendulum interacting with photon coherent fields in a detuned optical cavity, which creates an optical spring. Futhermore, the detuned cavity allows us to perform linear position measurement by direct photo-detection of the reflected light. We experimentally verify the conditional squeezing using the theory combining prediction and retrodiction based on the causal and anti-causal filters. As a result, the standard deviation of position and momentum are respectively given by 36 times the zero-point amplitude of position $q_{\rm zpf}$ and 89 times the zero-point amplitude of momentum $p_{\rm zpf}$. The squeezing level achieved is about 5 times closer to the zero-point motion, despite that the mass of the mechanical oscillator is approximately 7 orders of magnitude greater, compared to the previous study. Thus, our demonstration is the first step towards quantum control for massive objects whose mass-scale is high enough to measure gravitational interactions. Such quantum control will pave the way to test quantum mechanics using the center-of-mass mode of massive objects.
-
Quantum speed limit for robust state characterization and engineering
Abstract
In this paper, we propose a concept to use a quantum speed limit (QSL) as a measure of robustness of states, defining that a state with bigger QSL is more robust. In this perspective, it is important to have an explicitly-computable QSL, because then we can formulate an engineering problem of Hamiltonian that makes a target state robust against decoherence. Hence we derive a new explicitly-computable QSL that is applicable to general Markovian open quantum systems. This QSL is tighter than another explicitly-computable QSL, in an important setup such that decoherence is small. Also the Hamiltonian engineering problem with this QSL is a quadratic convex optimization problem, and thus it is efficiently solvable. The idea of robust state characterization and the Hamiltonian engineering, in terms of QSL, is demonstrated with several examples.
-
Generating Robust Entanglement via Quantum Feedback
Abstract
Generating entangled states is one of the most important tasks in quantum information technology. However, in reality any entanglement generator must contain some characteristic uncertainty, and as a result the produced entangled state becomes an undesirable mixed state. This paper develops a coherent feedback control scheme that suppresses the characteristic uncertainty of a typical entanglement generator (non-degenerate optical parametric oscillator) for producing robust Gaussian entangled states. In particular, we examine a two-mode squeezed state and Gaussian four-mode cluster states to demonstrate the effectiveness of the proposed control method.
-
Replacing measurement feedback with coherent feedback for quantum state preparation
Abstract
Measurement feedback is a versatile and powerful tool, although its performance is limited by several practical imperfections resulting from classical components. This paper shows that, for some typical quantum feedback control problems for state preparation (stabilization of a qubit or a qutrit, spin squeezing, and Fock state generation), the classical feedback operation can be replaced by a fully quantum one such that the state autonomously dissipates into the target or a state close to the target. The main common feature of the proposed quantum operation, which is called coherent feedback, is that it is composed of a series of dispersive and dissipative couplings inspired by the corresponding measurement feedback scheme.
-
Sensitivity Analysis of Cascaded Quantum Feedback Amplifier
Abstract
Quantum amplifier is an essential device in quantum information processing. As in the classical (non-quantum) case, its characteristic uncertainty needs to be suppressed by feedback, and in fact such a control theory for a single quantum amplifier has recently been developed. This letter extends this result to the case of cascaded quantum amplifier. In particular, we consider two types of structures: the case where controlled amplifiers are connected in series, and the case where a single feedback control is applied to the cascaded amplifier. Then, we prove that the latter is better in the sense of sensitivity to the uncertainty. A detailed numerical simulation is given to show actual performance of these two feedback schemes.
-
Optimal control for perfect state transfer in linear quantum memory
Abstract
A quantum memory is a system that enables transfer, storage, and retrieval of optical quantum states by ON/OFF switching of the control signal in each stages of the memory. In particular, it is known that, for perfect transfer of a single-photon state, appropriate shaping of the input pulse is required. However, in general, such a desirable pulse shape has a complicated form, which would be hard to generate in practice. In this paper, for a wide class of linear quantum memory systems, we develop a method that reduces the complexity of the input pulse shape of a single-photon while maintaining the perfect state transfer. The key idea is twofold; (i) the control signal is allowed to vary continuously in time to introduce an additional degree of freedom, and then (ii) an optimal control problem is formulated to design a simple-formed input pulse and the corresponding control signal. Numerical simulations are conducted for Lambda-type atomic media and a networked atomic ensembles, to show the effectiveness of the proposed method.
-
Geometric control theory for quantum back-action evasion
Abstract
Engineering a sensor system for detecting an extremely tiny signal such as the gravitational-wave force is a very important subject in quantum physics. A major obstacle to this goal is that, in a simple detection setup, the measurement noise is lower bounded by the so-called standard quantum limit (SQL), which is originated from the intrinsic mechanical back-action noise. Hence, the sensor system has to be carefully engineered so that it evades the back-action noise and eventually beats the SQL. In this paper, based on the well-developed geometric control theory for classical disturbance decoupling problem, we provide a general method for designing an auxiliary (coherent feedback or direct interaction) controller for the sensor system to achieve the above-mentioned goal. This general theory is applied to a typical opto-mechanical sensor system. Also, we demonstrate a controller design for a practical situation where several experimental imperfections are present.